I made the drive from Orlando to Largo to visit my dad today at work to get our parts manufactured. Here are some videos of our parts being made
-Anthony
Here is the shaft brace being cut using a high pressure water jet cutter. It was then deburred and welded.
Our motor mount was manufactured using a high precision laser cutter. The holes were then reamed to make sure they were within tolerance. The edges were also ground down.
We are mounting the motor controller to a heat buffer. This buffer is made from a 5/8 in thick aluminum plate. The plate was too long and needed to be trimmed a little. Watch how this saw just eats through the plate like its nothing.
On The Green Hybrid Cart Team 
Leave a comment